Thickness is what matters the most in liquid screed application. If the layer is too thin, it lacks strength. Cracks start to appear under the load. And if the layer is too thick, it takes weeks to dry. Longer drying times lead to shrinkage cracks. Cracks are inevitable if the liquid screed in Cheltenham is not installed by professionals.
We would recommend 25-50mm of liquid screed for most floors. However, uneven pouring leads to variations. A rushed job after leads to an ignored level, and the result is hollow spots or weak areas. We like to measure the depths accurately before pouring. We also use triponds or laser levels to make sure that the liquid screed is not uneven. We also adjust for room contours. For heated floors, we maintain a minimum cover over pipes. Due to all these steps, we can avoid uneven spots of hot and cold.
Underfloor heating screed in Oxford needs a precise thickness. Variations can cause inefficient heating, and that might lead to tearing up the floors and starting again. Our professionals ensure uniformity.
How We Avoid Curing Mistakes
We recommend allowing natural curing. Protect it from direct sun or wind. If possible, use polyethene sheets after the initial set and maintain even temperatures. In Cheltenham winters, the cold slows down the curing process. Use the heaters carefully. Underfloor heating screed in Oxford benefits from controlled curing. It ensures even heat distribution. Mistakes here mean inefficient systems. So, be patient because it will pay off. Hire experts since their oversight will avoid common errors.
Why Professional Pumping is Essential
Thanks to pumping, your liquid screed gets installed efficiently. DIY methods are not the correct way to do it. Hand mixing will lead to inconsistencies, and air pockets will form. These things together will cause weak points and cracks. Professional pumps ensure that the flow is even. Our professionals at Top Mix handle large areas quickly. Tight sites benefit a lot from this kind of precision.
Our trained operators can adjust for viscosity and prevent segregation. This mix remains uniform throughout the entire floor. Pumping spreads the screed across all corners, even if the layout is complex. If you require pumped underfloor heating in Oxford, reach out to our professionals because we can minimise defects.
Poor prep, wrong thickness, moisture, and curing errors plague many jobs. The homeowner might fear that the floor will be filled with defects. We use quality materials to install liquid screed in Cheltenham to prevent any sort of pitfalls. Reach out to us today and find out how we tackle these issues and give you the perfect results.